Some useful products for concrete repair and preservation
Concrete has good strength against compression, but it has considerably low strength against tension. With the addition of steel reinforcement, the tensile strength of the concrete is raised and as a result its resistance to stress is also enhanced. Regrettably, in the existence of water and oxygen, the corrosion occurs in steel. So, in almost all probable exposure conditions for reinforced concrete, corrosion of the steel is a great concern.
There are a wide range of high performance repair mortars and concrete for applications which vary from cosmetic to structural repairs. These products can repair the seeable signs of damage and address the deterioration. In this way, the longevity and sustainability of the structure are enhanced.
Given below, the details of the product
STEEL REINFORCEMENT PRIMERS
Primer is applied similar to anti-corrosion coating to reinforce steel in concrete restoration. Beside, it provides extra protection to reinforcing steel in areas with skinny concrete cover.
An extensive range of epoxy adhesives and other bonding agents are available. These are natural, compounded or synthetic materials and applied to improve the joining of a structure devoid of applying mechanical fasteners.
HAND APPLIED MORTARS
These are executable paste material utilized to fasten building blocks like bricks, stones, and concrete masonry units jointly to fill and seal unequal gaps among them, which can be applied manually.
FORMED REPAIR MATERIALS
A wide range of shutter formed repair materials is applied for the restoration of spalling concrete.
MACHINE APPLIED REPAIR MORTARS
These are executable paste material applied to fasten damaged concrete structures jointly to fill and seal unequal gaps among them. Two types of application are found which range from wet-spray & dry spray processes.
SURFACE APPLIED CORROSION INHIBITORS
Surface Applied Corrosion Inhibitors can be simply used to the surface of accessible concrete to enhance the longevity of any reinforced concrete structure.
PROTECTIVE LEVELING MORTARS/SURFACE FILLERS
These are wide array of mortar repair materials applied for pre-leveling of surfaces to facilitate renovating the cosmetic or structural deteriorated concrete and mortar.
Protective Coating Systems applied on a building front will safeguard from reinforcing steel corrosion, whereas still facilitating the building to breathe with circulation of water vapor via the defending coating. These systems are suitable for multi-purpose applications as well as for protective and aesthetical needs.
These types of products are provided to surfaces to minimize the penetration of water or chlorides. Sealers may enter into the surface or develop a very thin surface layer.
To get more details about the products, go through the following link.